No More Torch, No More Butane, the Vista Mini Portable Dab Vaporizer Wins the Game
Technology has come far in the last decade, and why not into the cannabis industry as well? Introducing the Vista Mini by XVape. A fully portable electronic dab rig designed to take your dabs with you wherever you go, with all the convenience of dabbing at home. Super sleek design and a large ceramic coil create an elegance of use unmatched by most competing electric rigs, and the built in wireless charging base comes standard in evey Vista Mini. Check out this video below for a full breakdown and functional use of the Vista Mini by Todd from Myxed Up Creations.
What's going on, everybody? Todd here from Myxed Up TV, and today, we're gonna be talking about the Vista Mini from XVAPE. It's a new style vaporizer. It's more of a portable dab rig. XVAPE was kind enough to toss it out to me, so today what we're gonna do, we're gonna open this bad boy up. I'm gonna show you all the different parts and the features of it, and we're gonna take a big old dab out and see how we like it. So, let's jump on into it, shall we?
So, when you first get your XVAPE Vista Mini, you'll notice when you open up the box there it's a pretty decent little box, it's gonna have a foam insert. You are gonna have your authenticity on the back here, so make sure that you're getting a true XVAPE. Let's go ahead, and we'll open up. You're gonna have a little card here, it's gonna tell you a bunch of the different features that actually come in this. This one has a couple different features here. So, detachable bubbler, pure taste, fantastic LED light, wireless charging, and three temperature settings. Pretty easy to do. It's got the quick start guide on here, but we're gonna get into it. So first here, you're gonna see on your user's manual ... you'll definitely want to keep a hold of this. It's gonna have everything that you're gonna need to know about your XVAPE inside of it. This one's got pretty much everything spelled out for you there, so we'll just run through the whole manual little bit by bit, and show you guys everything that comes in it.
Here it is. As you can see, your Vista Mini. I've got my vape here, pretty nifty little vape device there. This guy comes apart into different pieces, so totally cleanable. It's really nice. There's a glass carb cap there. You're also gonna get a funnel to put water in and out of your Vista. It's not necessary, but it does help a little bit if you need it. Then, we also have our mouthpiece. That's gonna come out too, nice little glass mouthpiece there. So, pull that out, then we have our accessories box. That's everything in the box. You probably want to keep that because it's a good little travel case to go along with everything.
In our accessory kit, it's gonna have all your other stuff. You're gonna have a coil in here, gonna have your charger. As you can see, a whole bunch of little things. Your little dab nail there. This is a ceramic one here, super, super nice. It's gonna come with some rubber silicons to keep everything from dropping off of your mouthpiece, but first thing. What I'm gonna do is I'm gonna take it apart for you so you can see all the little pieces, then we'll put it back together, fill it up with some water, and then we'll use it. Does that sound good? So, let's take our accessory box out. You're gonna get extra O-rings, so keep a hold of those. Extra silicone connectors, so these are actually nice holders. Make sure you keep those. You're gonna get your K-clip there which is really nice. It's actually meant to hold this. Here, we'll just actually pull it all apart.
So, your top part here, this actually just pulls straight off. It's just a push on and off. There's a nice little silicone ring that holds it on there. So, this is where you're gonna actually screw down your coil. Before we do that, I'm gonna go ahead and show you the rest of the step. So, if I unscrew this base here, you'll notice that the base where this all comes out. What's really nice, this is your bubbler tube here, so this is what your smoke is gonna be traveling through. That can get sticky and gunky, so very easy to pull apart. You could actually clean the entire thing, so you could go in and soak them if you want. That's just your little downstem there, so pull that out. You see here? This is your glass bubbler piece here. Very nice where your mouthpiece is gonna go in there, and then you have your base unit here, and that is basically your battery.
So, it does come with a micro USB charger here on the side. Probably the same as your phone unless you have an iPhone, but it also has a fun feature which if you use a charging dock station where you just lay down your cell phone or something like that, these will work on that. It doesn't come with the kit, but it's a generic device that you can get, so you can just set it down and it'll charge. I've actually charged this one up, so we should be ready to go. I'm gonna go ahead, and we've got our glass piece here. I've got a little bit of water here in this cup, and we're just gonna go ahead and pour a little bit of this water down into here. You can use your funnel if you want. You want to make sure that when you're putting your water in, you're going into the sides. You're not going into the center. If you put it in the center, it's gonna go down and hit your battery, and you don't want to do that.
It might even be easier for people, if you're a little bit afraid, you could fill it off just like this. So, you could see here, it's very simple. We're just gonna toss some water in and let it fill up. Now, you'll notice that there is a fill line on the battery here. It might be a little bit hard for you guys to see, but it's right there. There's a fill line, so when you put your glass bubbler back on top, you want to make sure you look through and you at least get above that fill line. If you fill it up too, too much, it'll end up pulling water back at you, and you don't want to do that. It'll end up being a straw. So, there we go. We've got our water in there. Make sure you're keeping it nice and straight so we don't get any water on anything else, and now that we've got our piece on there, I'm gonna go ahead. We're gonna take our top piece here, so this has a little O-ring that you can see. This little O-ring just came off, but it's not a big deal.
It just sits there anyway, and it's meant to keep both pieces so that they're nice and air tight once you just screw them down. So now that we have this piece on, and then we've got our O-rings situated ... I'm having some O-ring issues. It's okay. Just take a second here, put that back on. There we go. So, we got the O-ring on there nice. Put the bubbler down in here and then you go ahead and screw these two pieces together, and what that's doing now is actually pulling the two O-rings down and getting a nice tight seal that you can see there. So, now our downstem is in there, we got our water at a right spot. Time to take our coil.
So, I did get a chance to try this one out a little bit just to make sure that we would run through this okay. So, I've got a little bit of dab in there, but it's a ceramic style coil, and I'm actually gonna toss a little bit more in there. What's neat about this device is you can actually just drop in a couple dabs right into the device and it will automatically just stay there, and you can just dab it and dab it, and pass it around. We've got our coil screwed down there now onto the top of our base there. We're gonna take our cap here. Remember how I told you before? It just pulls off, so you just push it right back on there. Bam, very easy. So now, we've got our carb cap. You'll want to make sure that your carb cap is gonna go on top. We're also going to be using one of our silicon connectors here. And so this is what, you want to make sure you do this before you do anything else, because you don't want to drop your glass carb cap.
So, we'll go ahead and take this silicone, and we're just gonna pull it over on both of these little pieces here. Move that back out a little bit. There you go. So, you can see here it's like a silicone connector, and that comes in handy especially if you're taking a dab and it falls off or something. Makes it very convenient so that people don't lose it. We'll get into that in just a little bit, and now we got our mouthpiece. Mouthpiece goes on. Your K-clip is designed to keep your mouthpiece from coming out. What I really like that they did, this 14 millimeter glass on glass here, because what's really cool is if you've got a 14 millimeter hose for a vaporizer or something like that, you could actually put a big hose on this and you could just vape. You wouldn't have to actually hold onto it or anything.
Neat little thing there, but we're gonna take our K-clip. Just clips on just like that, so now my mouthpiece isn't gonna come out. We've already got everything set, and it looks like we're about ready to go. You're also gonna get a little dab tool here, a key chain XVAPE dab tool. Pretty, pretty nice. So, I'm gonna go ahead, and we'll turn on the unit and show you guys a couple of the features. So, I think it's one, two, three, and there we go. So, you can see now that it turned on. It's got a nice red light there. If I do two buttons, one, two, it changes the color. Each color setting is actually a temperature setting. The white is the lowest setting. I believe it runs around 200 degrees or so. We can look at it here. Oh, that was Celsius. So, 535 degrees is the white temperature. 662 is the green, so you tap it twice and it goes green, and then 752 is the high. So tap it twice and go to the red.
I'm gonna do a nice high dab for us today so we could actually see it work for us. So what I've done here, is I've brought in a little bit of dabs here from Dabbington Concentrates. Thanks Dabbington. I'm just gonna take a little bit of the dab and put it on here, and I like to put it in first and then heat it up. There's our little dab that we're gonna go here, and then I'm just gonna drop it right down into our coil here. So, I'll show you guys. You can see the dab down in there, and it's not started yet. We haven't started heating it, so we're gonna put our carb cap back on and then what I like to do is let it warm itself up. So, we tap it one time, it'll start flashing, and that's actually the function. It runs through a 20 second autoheat cycle, and then once it's a solid color again, it's done heating. So, you can hit the button again and it'll run through another session for you.
So, it's really nice to be able to just pass it around to friends, and it also has a off feature. As you can see, it shut itself down just for me right now. So, I'm gonna go ahead and one, two, three. We turn it back on, we're at the red setting. We've chosen our heat setting that we like, and I'm gonna hit it one time, and now it's gonna start to flash. So now as it's flashing, it's actually starting to melt the dabs on the ceramic coil there, and I can actually start to hit it.
Tasty. So, what's really nice about this is it's more of a true vape. You can see that we've already stopped our heating cycle. It's already run through, but if we wanted to hit it again and get a nice warmer hit, just turn it on again. Some people like to take long, drawn out, slow dabs and that's where you'll get your best flavors and biggest hits. Pretty simple device, right? Very straightforward. I think it's a really nice vape that you can get out there on the market. I'm not sure the pricing. I think we're probably selling these at about $180 or so. It might be actually a little bit less, but I'd have to look it up. I'm not actually sure of the price, but really enjoy this little vape. It's a cool little portable guy. True vape, so nice little 2,000 milliamp battery on this guy, and I believe it's gonna have a one year manufacturer warranty from your purchase date, so make sure that you keep your receipt for that guy.
Over all though, very, very good unit. The Vista Mini by XVAPE, so. If you guys enjoyed this, you know, please subscribe to our channel below. Like always, we do appreciate you guys hitting that subscribe and like button. If you want to pick up one of these XVAPES, you can go over to MyxedUp.com or you can come in at any one of our Myxed Up Creations locations. I pretty much really like this guy, so I hope you guys enjoyed this tutorial. As always, I'm Todd. This is Myxed Up TV, and we'll see you guys next time.
So after everything you have seen here, it's no wonder the Vista Mini Portable Dab Vaporizer if among one of the leading devices on the market today. With its many features and amazing design, this electric rig will keep you dabbing any time. For more information about the Vista Mini Portable Dab Vaporizer please visit one of our Colorado locations in Denver, Aurora, Colorado Springs, and Pueblo. You can also order now online at Myxedup.com.