Making Your Own Concentrate Vape Juice With Solvent710
Turn waxes and shatter concentrates into a vape e-liquid juice with Solvent710
In this episode of Myxed Up TV, Todd gives us the rundown on how to turn your waxes, and shatter concentrates into a vapable solution that you can easily load into almost any atomizer or tank that you can use with your electronic cigarette. In this video Todd will use Solvent 710 Premium Liquid Zags Concentrate Emulsifier along with an O.penVAPE Fill It Yourself Kit to create that sweet nectar that you can take on the go.
You can find Solvent 710 Premium Liquid Zags Concentrate Emulsifier and O.penVAPE products, as well as many other dabbing essentials and handheld, portable vaping devices that were built to keep up with you and your busy lifestyle. Myxed Up Creations has you covered at any of our retail stores located in Denver, Aurora, Colorado Springs, and Pueblo, Colorado, as well as here online at MyxedUp.com.
Hey everybody Todd here from Myxed Up TV. Today we're gonna be showing you some Solvent 710. This stuff is actually a liquid emulsifier that you can put any of your waxes, shatters, hash things like that in to, and turn them into a vapeable e-liquid. So this is the juice here. It comes in a nice glass vial as you can see. This flavor that I have today is actually Citrus Haze so there's a little bit there for you so you take a look.
What we're gonna do is take some concentrate that we have here. It's about a half a gram, we're going to mix it into this juice here and then we're going to put it into a fill it yourself top. Now this is just a refillable vape pen top that you can put on most batteries. We also could put it into other vape pen tops it doesn't really matter as long as it's a vape that takes a liquid. You should be able to use the Solvent 710 juice. The only things you'll really need is some hot water. We just stuck this in the microwave and heated up a glass of water. That's just to set this in to help dissolve and, or if you want to speed things up, we're also gonna use a small torch just to kind of move the process along so that way the video doesn't take too too long. So let's just go ahead and jump on into this. The first thing I'm going to want to do is get my concentrate in my jar here. Unscrew the lid on your jar as you can see it's just a nice little glass jar that you're gonna have. Then we are going to take our concentrate here. What's nice about the silicone is that you can just kind of break it off. We're going to take that concentrate there and we're just going to put it inside of this jar here. Flatten it out a little bit so it'll just drop right in there.
There we go. So you can see we just put the chunk in there. There's a little bit of extra in here, lets see if I can just scrape the rest. Waste not, want not, you know? Okay so now that you've got your concentrate inside of your solvents glass jar. Go ahead and put the lid back on. So this guy is going to start to dissolve, what you're gonna want to do is start to warm it up. In the instructions it says you can just put it in some hot water and then just leave it. It'll just start to warm up, everything in there will become softer. It'll become more of like a liquid, as your concentrates do.
To me personally, that sometimes takes a little while, but you'll probably get the best effect with your actual liquids. I'm actually going to just hit this a little bit with a torch. It's just gonna help warm it up, but you should definitely be very careful if you're going to try and do this at home. If you do it too much, too fast, you could end up breaking the glass and then that's not going to do any good for anybody. You're just gonna end up with a whole bunch of hot liquid on you. So as we warm it up here we'll just go ahead and start to shake it. It's warming up real nice. I'll go ahead and drop this guy right into here and we're just gonna let it kind of sit there and warm up. As it starts to warm up it should start to dissolve. I'll come back in a few minutes as soon as this this is dissolved and we'll show you the rest of the video.
All right thanks for waiting for that. So it's been about 15 minutes now and with a little bit of shaking, you can kind of see that the little bit of concentrate that we put in there, the "THC concentrate," that's actually all dissolved. This stuff now is going to be, basically, a nice liquidy vape juice. You're pretty much set from here. What we're gonna do now, I'm going to show you how to put it into a refillable O.penVAPE top, but like I was telling you before, this stuff, it's gonna stay this consistency. So what's really nice about it is you can put it into any vape pen that you want. So, I have a little syringe here. This comes from the O.pen Fill it Yourself Kit, which is really nice, if you guys haven't seen that before. It's basically a kit that comes with a vape pen, a top. We did a whole tutorial on it. The pen kind of looks like this, but they have replaceable tops. Empty tops like this that you can get. And then with the Solvent 710 you can just keep remaking juice and turning it into a vapable concentrate that you can put into your pens.
What we're gonna do now is unscrew... Well here, first, fill our top. We'll take the lid off of the top here. That's the mouthpiece and there's a little blue rubber pin right there. We're going to pull that out, and that's where, actually, the concentrates going to go. We'll take our syringe and our concentrate jar here. Go ahead and just open this guy up. Now we're going to suck up some of this concentrate. And then we're gonna go ahead and put it into here, into our vape pen. This, as you can see, will go right into that hole on the top. And then as we start to fill it up, you'll notice it just starts to fill up pretty easy there. Just fill that guy all the way up. You can put the rest back in your jar. It's really nice about the jars is you're gonna always be able to save your stuff inside of there, so.
So, definitely keep a hold of those. Take our little rubber pin here, and we'll put that right back in top of there. And then we'll take our lid and put that right back on top there. So, now we've just filled up a vape pen, right there, as you can see. Go ahead... I'm just pulling on it a little bit to help kind of move the flow of juice down into the cotton, and then back out. If you're just refilling your pen, you won't need to do that, but you're pretty much ready to go.
Just screw that guy right down onto a battery, and then puff away. Lemony! Citrus Haze! Yeah! So there you go guys. A super easy solvent that you can use to turn your solid concentrates into a vapable vape pen liquid. Pretty simple, but you know, with the amount that you can get in here and put into your pens. It's kind of nice because you could just travel with it a little bit keep refilling. Super fun, super convenient and it'll get you through everything. You can check those out we have the solvent 710 online at Myxedup.com we also have it in all of our shops too. I hope you guys enjoyed this tutorial and we'll see you next time.